Made from solid mahogany this 4th Marine Logistics Group-Marine Forces Reserves wooden plaque is hand carved and finished by our expert craftsmen. The mahogany is cured and treated at our own factory to avoid warping and twisting over the years and a special keyhole slot is recessed into the rear to ensure a flush fitting on any wall surface.

If urgency is an issue we can offer an express 14 day delivery for the extra fee shown. Our staff has been specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

Since 1991 our customers have included the U.S. Navy, U.S. Air Force, U.S. Army, U.S. Coast Guard and U.S. Marine Corps and hundreds of Federal, State and local government organizations. We are officially licensed by the military organizations mentioned too. <B>Order online or call our design consultants between 9:00 a.m. EST and 6:00 p.m. at 1-800-615-6424.</b> Order turnaround is two to six weeks depending on what shipping option you choose.

Our custom designed U.S. military wooden insignia, emblem and seal plaques for walls and podiums are the finest made anywhere! Our customers are seeking the highest quality of plaques available. We are the only manufacturer using solid Philippine mahogany to make our emblems and seal plaques. Virtually all of our competitors use pressed fiber board or soft woods. The mahogany is cured and treated at our own factory to avoid warping and twisting over the years and a special keyhole slot is recessed into the rear to ensure a flush fitting on any wall surface.

All our military and government solid wooden desk nameplates are hand carved and then hand painted or varnished. Each nameplate is given three coats of clear lacquer to guard again tarnishing over the years. Because we dry and cure the wood at our own factory you can be sure that our products will not warp or twist. You can choose any logo, seal, rank or color of rank pin cushion for the left and right hand side of the nameplate. Please complete the order section below to customize this nameplate to your requirements. If you do not want to have any base/plinth wording, just leave it blank. A picture of your completed order will be sent to you via email for approval prior to shipping.

Our staff have been specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

Dimensions: Width: 16″ Height: 7″ Depth: 3″ all measurements are approximate.

Made from solid mahogany this custom made United States Marine Corps (USMC) Seal wooden plaque is hand carved and finished by our expert craftsmen. The mahogany is cured and treated at our own factory to avoid warping and twisting over the years and a special keyhole slot is recessed into the rear to ensure a flush fitting on any wall surface. Our custom plaques are made of the highest quality solid mahogany and are perfect for office wall hangings, podiums and unique gifts.

We can create and design wooden plaques in any shape and size! If urgency is an issue we can offer an express 14 day delivery for the extra fee shown. Our staff have been specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

All our military and government desk nameplates are hand carved and then hand painted or varnished. Each nameplate is given three coats of clear lacquer to guard again tarnishing over the years. Because we dry and cure the wood at our own factory you can be sure that our products will not warp or twist. You can choose any logo, seal, rank or color of rank pin cushion for the left and right hand side of the nameplate. Please complete the order section below to customize this nameplate to your requirements. If you do not want to have any base/plinth wording, just leave it blank. A picture of your completed order will be sent to you via email for approval prior to shipping.

Our staff have been specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

Dimensions: Width: 16″ Height: 7″ Depth: 3″ all measurements are approximate.

All our military and government desk nameplates are hand carved and then hand painted or varnished. Each nameplate is given three coats of clear lacquer to guard again tarnishing over the years. Because we dry and cure the wood at our own factory you can be sure that our products will not warp or twist. You can choose any logo, seal, rank or color of rank pin cushion for the left and right hand side of the nameplate. Please complete the order section below to customize this nameplate to your requirements. If you do not want to have any base/plinth wording, just leave it blank. A picture of your completed order will be sent to you via email for approval prior to shipping.

Our staff have been specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

Dimensions: Width: 16″ Height: 7″ Depth: 3″ all measurements are approximate.

This United States Marine Corps Naval Aviation Observer (NAO) Wings Insignia personalized wooden desk nameplate is hand carved from solid wood and then hand painted or varnished. Each nameplate is given three coats of clear lacquer to guard again tarnishing over the years. We dry and cure the wood at our own factory you can be sure that our products will not warp or twist.

You can choose any logo, seal, rank or color of rank pin cushion for the left and right hand side of the nameplate. Please complete the order section below to customize this nameplate to your requirements. If you do not want to have any base/plinth wording, just leave it blank. A picture of your completed order will be sent to you via email for approval prior to shipping.

Our staff are specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

Made from solid mahogany this (USMC) United States Marine Corps Operational Test and Evaluation Activity seal wooden plaque is hand carved and finished by our expert craftsmen. The mahogany is cured and treated at our own factory to avoid warping and twisting over the years and a special keyhole slot is recessed into the rear to ensure a flush fitting on any wall surface.

If urgency is an issue we can offer an express 14 day delivery for the extra fee shown. Our staff has been specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.

This United States Eagle and Flag Desk Nameplate model one is hand carved from solid mahogany and then hand painted or varnished. Each nameplate is given three coats of clear lacquer to guard again tarnishing over the years. We dry and cure the wood at our own factory you can be sure that our products will not warp or twist.

You can choose any logo, seal, rank or color of rank pin cushion for the left and right hand side of the nameplate. Please complete the order section below to customize this nameplate to your requirements. If you do not want to have any base/plinth wording, just leave it blank. A picture of your completed order will be sent to you via email for approval prior to shipping.

Our staff are specially trained to help you with any questions or design issues that you might have. Call us toll free on 1-800-615-6424.